Add Lan Dmz Inbound Service Rules - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
9. Make your selections from the menus and enter the settings.
For more information about the menus and settings, see
page 214.
The following table lists the menus that apply to an IPv6 LAN DMZ outbound rule.
Menus that apply to all IPv6 LAN DMZ outbound
rules
Service
Action
LAN Users
DMZ Users
Log
10. Click the Apply button.
Your settings are saved. The new rule is added to the Outbound Services table on the
LAN DMZ Rules screen.

Add LAN DMZ Inbound Service Rules

For LAN DMZ traffic, the inbound default policy is to block all traffic to the LAN.
You can change the default policy by adding LAN DMZ firewall rules that allow specific types
of traffic to come in from the DMZ to the LAN. You can allow access based on the service or
application, source or destination IP addresses, and time of day.
Menus that apply only when your selection from
the Action menu is not BLOCK always
Select Schedule
Note:
from the Action menu includes by schedule.
Customize Firewall Protection
248
Settings for Outbound Rules
This menu is available only when the selection
on