NETGEAR FVS336Gv3 Reference Manual page 76

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
8. Enter the settings as described in the following table.
Setting
QoS Type
Interface
Service
Direction
Diffserv QoS Match
Description
From the menu, select Rate Control.
For information about the Priority selection, see
QoS Profile on page 78.
From the menu, select a WAN interface.
From the menu, select a service or application to be covered by this profile. If
the service or application does not appear in the list, you must define it (see
Manage Customized Services
From the menu, select the direction to which rate control is applied:
• Inbound Traffic. Rate control is applied to inbound traffic only.
• Outbound Traffic. Rate control is applied to outbound traffic only.
• Both. Rate control is applied to both outbound and inbound traffic.
Enter a DSCP value in the range of 0 through 63. Packets are classified against
this value. Leave this field blank to disable packet matching.
Configure the IPv4 Internet and WAN Settings
76
Add a Priority Queue WAN
on page 282).