NETGEAR FVS336Gv3 Reference Manual page 188

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
8. Enter the settings as described in the following table.
Setting
DMZ Port Setup
Select the Yes radio button to configure the DMZ port settings. Complete the following fields:
• IPv6 Address. Enter the IP address of the DMZ port. Make sure that the DMZ port IP address, LAN
port IP address, and WAN port IP address are in different subnets. The default IP address for the
DMZ port is fdff::1.
• Prefix Length. Enter the IPv6 prefix length, for example, 10 or 64. The default prefix length for the
DMZ port is 64.
Note: By default, the DMZ port is disabled. After you configure the DMZ port, you can select the No radio
button to disable the DMZ port without losing the DMZ configuration.
DHCPv6 for DMZ Connected Computers
DHCP Status
DHCP Mode
Domain Name
Server Preference
Description
Enable the DHCPv6 server by selecting Enable DHCPv6 Server from the
DHCP Status menu.
The default menu selection is Disable DHCPv6 Server.
From the DHCP Mode menu, select Stateless.
The IPv6 clients generate their own IP address by using a combination of
locally available information and router advertisements but receive DNS server
information from the DHCPv6 server.
For stateless DHCPv6, you must configure the RADVD and advertisement
prefixes (see Manage the IPv6 Router Advertisement Daemon for the DMZ
page 189).
Enter the domain name of the DHCP server.
Enter the DHCP server preference value. The possible values are 0–255, with
255 as the default setting.
This is an optional setting that specifies the server's preference value in a
server advertise message. The client selects the server with the highest
preference value as the preferred server.
Configure the IPv6 LAN Settings
188
on