NETGEAR FVS336Gv3 Reference Manual page 393

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. If the IKE policy for which you want to configure XAUTH is associated with a VPN policy, first
disable the VPN policy:
a. Select VPN > IPSec VPN > VPN Policies.
The VPN Policies screen displays the IPv4 settings.
b. To disable a VPN policy for IPv6 instead of IPv4, in the upper right, select the IPv6
radio button.
The VPN Policies screen displays the IPv6 settings.
c. In the List of VPN policies table, select the VPN policy that is associated with the
IKE policy that you want to change.
Note: When you use the VPN IPsec Wizard, the VPN and IKE policies that
are added automatically have the same name.
d. Click the Disable button.
The VPN policy is disabled. The green circle to the left of the VPN policy turns gray.
7. Select VPN > IPSec VPN.
The IPSec VPN submenu tabs display with the IKE Policies screen for IPv4 in view.
8. To change an IKE policy for IPv6 instead of IPv4, in the upper right, select the IPv6 radio
button.
The IKE Policies screen for IPv6 displays.
9. In the List of IKE Policies table, click the Edit button for the IKE policy for which you want to
enable and configure XAUTH.
The Edit IKE Policy screen displays.
Set Up Virtual Private Networking With IPSec Connections
393