NETGEAR FVS336Gv3 Reference Manual page 361

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
Your settings are saved. Continue the manual configuration of the VPN client with the
IPSec configuration.
9. In the tree list pane of the Configuration Panel screen, right-click the vpn_client
authentication phase name and select New Phase 2.
10. Change the name of the IPSec configuration (the default name is Tunnel):
a. Right-click the IPSec configuration name.
b. Select Rename.
c. Type netgear_platform.
d. Click anywhere in the tree list pane.
Note: This is the name for the IPSec configuration that is used only for the
VPN client, not during IPSec negotiation. You can view and change
this name in the tree list pane. This name must be a unique name.
The IPSec pane displays in the Configuration Panel screen, with the IPSec tab selected
by default:
Set Up Virtual Private Networking With IPSec Connections
361