NETGEAR FVS336Gv3 Reference Manual page 105

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
7. Click the Add button under the List of Available ISATAP Tunnels table.
The Add ISATAP Tunnel screen displays.
8. Specify the tunnel settings as described in the following table.
Setting
ISATAP Subnet Prefix
Local End Point
Address
IPv4 Address
9. Click the Apply button.
Your settings are saved. The tunnel is added to the List of Available ISATAP Tunnels table
on the ISATAP Tunnels screen.
Change an ISATAP Tunnel
The following procedure describes how to change an existing ISATAP tunnel.

To change an ISATAP tunnel:
1. On your computer, launch an Internet browser.
Description
The IPv6 prefix for the tunnel.
From the menu, select the type of local address:
• LAN. The local endpoint address is the address of the default VLAN.
• Other IP. The local endpoint address is another LAN IP address that you
must specify in the IPv4 Address fields.
If you select Other IP from the Local End Point Address menu, enter the IPv4
address.
Configure the IPv6 Internet and WAN Settings
105