Build An Ssl Portal With The Ssl Vpn Wizard - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
• Add SSL VPN users that are allowed to access the SSL portal (see
Accounts on page 502.
• Add more applications and services for SSL port forwarding (see
for SSL VPN Port Forwarding
• Add network resource objects such as groups of IP addresses, IP address ranges, and
application of services for easier configuration of SSL access policies (see
Network Resource Objects to Simplify Policies
• Add SSL access policies to reinforce that users access only the applications and services
that you assigned to the SSL portal (see
page 476).

Build an SSL Portal with the SSL VPN Wizard

The SSL VPN Wizard lets you build an SSL portal by guiding you through six screens.

To build an SSL portal with the SSL VPN Wizard:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select VPN > IPSec VPN > SSL VPN Wizard.
The SSL VPN Wizard Step 1 of 6 screen displays.
on page 456).
Set Up Virtual Private Networking with SSL Connections
on page 470).
Configure User, Group, and Global Policies
432
Manage User
Configure Applications
Manage
on