Test The Connection And View Connection And Status Information - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
14. Specify the default lifetimes in seconds:
• Authentication (IKE), Default. The default lifetime value is 3600 seconds. Change
this setting to 28800 seconds to match the configuration of the VPN firewall.
• Encryption (IPSec), Default. The default lifetime value is 1200 seconds. Change this
setting to 3600 seconds to match the configuration of the VPN firewall.
15. Click the Save button.
Your settings are saved. The manual configuration of the VPN firewall is now complete.
For information about testing the new VPN tunnel connection, see
and View Connection and Status Information
Test the Connection and View Connection and Status
Information
The following sections provide information about how to test VPN tunnel connections and
view connection and status information:
• Test the NETGEAR ProSAFE VPN Client VPN Tunnel Connection
• NETGEAR ProSAFE VPN Client Status and Log Information
• View the VPN Firewall IPSec VPN Connection Status and Terminate or Establish Tunnels
• View the VPN Firewall IPSec VPN Log
Set Up Virtual Private Networking With IPSec Connections
on page 363.
363
Test the Connection