NETGEAR FVS336Gv3 Reference Manual page 557

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Administration > Settings Backup & Upgrade.
The Settings Backup and Firmware Upgrade screen displays.
WARNING:
Once you start restoring the default settings, do not interrupt the
process. Do not try to go online, turn off the VPN firewall, shut
down the computer, or do anything else to the VPN firewall until the
default settings are fully restored.
7. Click the Default button.
The VPN firewall reboots. During the reboot process, the Settings Backup and Firmware
Upgrade screen might remain visible or a status message with a counter might show the
Optimize Performance and Manage Your System
557