NETGEAR FVS336Gv3 Reference Manual page 81

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Network Configuration > QoS.
The QoS screen displays. The following figure shows some profiles in the List of QoS
Profiles table.
7. To enable QoS, select the Yes radio button.
By default, the No radio button is selected.
8. Specify the profile type that must be active.
• Rate control. All rate control QoS profiles that you configure are active, but priority
QoS profiles are not.
• Priority. All priority QoS profiles that you configure are active, but rate control QoS
profiles are not.
9. Click the Apply button.
Your settings are saved.
The List of QoS Profiles table shows the following columns:
Configure the IPv4 Internet and WAN Settings
81