Change A Secondary Lan Ipv4 Address - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
The Available Secondary LAN IPs table displays the secondary LAN IP addresses that
you added to the VPN firewall.
7. In the Add Secondary LAN IP Address section, enter the following settings:
• IP Address. Enter the secondary address that you want to assign to the LAN ports.
• Subnet Mask. Enter the subnet mask for the secondary IP address.
8. Click the Add button.
The secondary IP address is added to the Available Secondary LAN IPs table.
9. Repeat Step 7
Available Secondary LAN IPs table.
Note: You cannot configure secondary IP addresses in the DHCP server.
For the hosts on the secondary subnets, you must manually configure
the IP addresses, gateway IP address, and DNS server IP addresses.

Change a Secondary LAN IPv4 Address

The following procedure describes how to change an existing secondary LAN IPv4 address.

To change a secondary LAN IP address:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
and Step 8 for each secondary IP address that you want to add to the
Configure the IPv4 LAN Settings
131