NETGEAR FVS336Gv3 Reference Manual page 506

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
Setting
Password
Confirm Password The password that you enter in this field must be identical to the password that you
Idle Timeout
9. Click the Apply button.
Your settings are saved. The user is added to the List of Users table.
Change a User Account
The following procedure describes how to change an existing user account. However, you
cannot change the user name or the group to which the user is assigned.

To change a user account:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Users > Users.
The Users screen displays.
7. In the List of Users table, click the Edit button for the user that you want to change.
The Edit Users screen displays.
8. Change the settings.
For more information about the settings, see
9. To change the password, select the Check to Edit Password check box.
Description
The password that the user must enter to gain access to the VPN firewall.
enter in the Password field.
The period after which an idle user is automatically logged out of the web management
interface. The default idle time-out period is 5 minutes.
Manage Users, Authentication, and VPN Certificates
506
Add a User Account on page 504.