Lan Wan Inbound Services Rules - NETGEAR ProSafe FVS338 Reference Manual

.
Figure 4-3

LAN WAN Inbound Services Rules

This Inbound Services Rules table lists all existing rules for inbound traffic. If you have not
defined any rules, no rules will be listed. By default, all inbound traffic is blocked. WAN Users:
Whether all WAN addresses or specific IP addresses are included in the rule.
To create a new inbound service rule:
1. Click Add under the Inbound Services Table. The Add LAN WAN Inbound Service screen
will display.
2. Complete the Add WAN LAN Inbound Services screen (see
3. Click Reset to cancel your settings and return to the previous settings.
4. Click Apply to save your changes and reset the fields on this screen. The new rule will be
listed on the Inbound Services table.
5. Click Apply to save your settings. The new rule will be added to the Inbound Services table.
Firewall Protection and Content Filtering
FVS338 ProSafe VPN Firewall 50 Reference Manual
v1.0, September 2006
Table 4-2 on page 4-5).
4-9