Change A Qos Profile - NETGEAR FVS336Gv3 Reference Manual

Prosafe dual wan gigabit ssl vpn firewall
Hide thumbs Also See for FVS336Gv3:
Table of Contents

Advertisement

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
QoS Type. The type of profile, either Rate Control or Priority.
Interface Name. The WAN interface to which the profile applies (WAN1 or WAN2).
Service. The service to which the profile applies.
Direction. The WAN direction to which the profile applies (inbound, outbound, or
both).
Rate. The bandwidth rate in Kbps or the priority.
Hosts. The IP address, IP addresses, or group to which the rate control profile
applies. (The information in this column does not apply to priority profiles.)
Action. The Edit button provides access to the Edit QoS screen for the
corresponding profile.
For more information about the information that is shown in the List of QoS Profiles table,
see
Add a Rate Control WAN QoS Profile
QoS Profile
on page 78.

Change a QoS Profile

The following procedure describes how to change an existing WAN QoS profile.
To change a QoS profile:
1.
On your computer, launch an Internet browser.
2.
In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3.
In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4.
If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5.
Click the Login button.
The Router Status screen displays.
6.
Select Network Configuration > QoS.
The QoS screen displays.
7.
In the List of QoS Profiles table, click the Edit button for the profile that you want to change.
The Edit QoS screen displays.
on page 75 and
Configure the IPv4 Internet and WAN Settings
82
Add a Priority Queue WAN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents