NETGEAR FVS336Gv3 Reference Manual page 299

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Security > Services > QoS Profiles.
The QoS Profiles screen displays.
7. In the List of QoS Profiles table, click the Edit button for the QoS profile that you want to
change.
The Edit QoS Profile screen displays.
8. Change the settings.
For information about the settings, see
9. Click the Apply button.
Your settings are saved. The modified QoS profile displays in the List of QoS Profiles
table on the QoS Profiles screen.
Remove One or More IPv4 QoS Profiles
The following procedure describes how to remove one or more IPv4 QoS profiles that you no
longer need as objects for firewall rules.

To remove one or more IPv4 QoS profiles:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
Add an IPv4 QoS Profile
Customize Firewall Protection
299
on page 296.