NETGEAR FVS336Gv3 Reference Manual page 144

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
Setting Description
DHCP for DMZ Connected Computers
Select one of the following radio buttons:
• Disable DHCP Server. If another device in the DMZ functions as the Dynamic Host Configuration
Protocol (DHCP) server for the DMZ, or if you intend to manually configure the network settings of all
computers in the DMZ, select the Disable DHCP Server radio button to disable the DHCP server. This
is the default setting.
• Enable DHCP Server. To enable the VPN firewall to function as the DHCP server for the DMZ, select
the Enable DHCP Server radio button.
Complete the Start IP Address, End IP Address, and Lease Time fields. The Domain Name, Primary
DNS Server, Secondary DNS Server, and WINS Server fields are optional, as is the Enable LDAP
information check box and associated fields.
• DHCP Relay. To use a DHCP server somewhere else in your network as the DHCP server for the
DMZ, select the DHCP Relay radio button. In the Relay Gateway field, enter the IP address of the
DHCP server.
Domain Name This setting is optional. Enter the domain name of the VPN firewall.
Start IP Address Enter the start IP address. This address specifies the first of the contiguous
addresses in the IP address pool. Any new DHCP client joining the DMZ is
assigned an IP address between this address and the end IP address. The default
IP address 176.16.2.100.
End IP Address Enter the end IP address. This address specifies the last of the contiguous
addresses in the IP address pool. Any new DHCP client joining the DMZ is
assigned an IP address between the start IP address and this IP address. The
default IP address 176.16.2.254.
Note:
LAN TCP/IP address of the VPN firewall (that is, the IP address in the DMZ Port
Setup section as described earlier in this table).
Primary DNS Server This setting is optional. If an IP address is specified, the VPN firewall provides this
address as the primary DNS server IP address. If no address is specified, the
VPN firewall provides its own DMZ IP address as the primary DNS server IP
address.
Secondary DNS Server This setting is optional. If an IP address is specified, the VPN firewall provides this
address as the secondary DNS server IP address.
WINS Server This setting is optional. Enter a WINS server IP address to specify the Windows
NetBIOS server, if one is present in your network.
Lease Time Enter a lease time. This specifies the duration for which IP addresses are leased
to clients.
The start and end DHCP IP addresses must be in the same network as the
Configure the IPv4 LAN Settings
144