NETGEAR FVS336Gv3 Reference Manual page 25

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

To log in to the VPN firewall:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
If you connect remotely to the VPN firewall with a browser through an SSL connection for
the first time, you might get a message about the SSL certificate.
3. If you get a message about the SSL certificate, follow the directions of your browser to
accept the SSL certificate.
4. In the Username field, type admin.
Use lowercase letters.
5. In the Password / Passcode field, type password.
Use lowercase letters.
Note: In the Domain menu, leave the domain at geardomain.
6. Click the Login button.
The web management interface displays, showing the Router Status screen. The
following figure shows the top part of the Router Status screen. For more information, see
View the System Status on page 586.
Get an Overview of the Features and Hardware and Log In
25