Display The Status Of Active Port Triggering Rules - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Security > Port Triggering.
The Port Triggering screen displays.
7. In the Port Triggering Rules table, select the check box to the left of each port triggering rule
that you want to remove or click the Select All button to select all rules.
8. Click the Delete button.
The selected rules are removed from the Port Triggering Rules table.

Display the Status of Active Port Triggering Rules

The following procedure describes how to display the status of active port triggering rules,
including the rule number, LAN IP address, open ports, and the time that the ports remain
open.

To display the status of active port triggering rules:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
Protect Your Network
331