NETGEAR FVS336Gv3 Reference Manual page 284

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
6. Select Security > Services.
The Services screen displays. The Custom Services Table shows the user-defined
services. The following figure shows some examples.
7. In the Add Customer Service section, enter the settings as described in the following table.
Setting Description
Name A descriptive name of the service for identification and management purposes.
Type From the Type menu, select the Layer 3 protocol that the service uses as its transport
protocol: TCP, UDP, ICMP, or ICMPv6.
ICMP Type A numeric value that can range between 0 and 40.
For a list of ICMP types, visit http://www.iana.org/assignments/icmp-parameters.
Note:
Start Port The first TCP or UDP port of a range that the service uses.
Note:
Finish Port The last TCP or UDP port of a range that the service uses. If the service uses only a single
port number, enter the same number in the Start Port and Finish Port fields.
Note:
8. Click the Apply button.
Your settings are saved. The new custom service is added to the Custom Services table.
Change a Customized Service
The following procedure describes how to change an existing customized service.

To change a service:
1. On your computer, launch an Internet browser.
This field is enabled only when you select ICMP or ICMPv6 from the Type menu.
This field is enabled only when you select TCP or UDP from the Type menu.
This field is enabled only when you select TCP or UDP from the Type menu.
Customize Firewall Protection
284