Manage The Pptp Server; Pptp Servers Overview - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
8. In the List of VPN Policies table, click the Edit button for the VPN policy that you want to
change.
The Edit VPN Policy screen displays. The following figure shows only the top part with the
General section of the Edit VPN Policy screen for IPv6. The Edit VPN Policy screen for
IPv4 is identical to the Edit VPN Policy screen for IPv6.
9. Select the Enable NetBIOS? check box.
10. Click the Apply button.
Your settings are saved.

Manage the PPTP Server

The following sections provide information about how to manage the PPTP server:
•

PPTP Servers Overview

• Enable and Configure the PPTP Server
• View the Active PPTP Users and Disconnect Active Users
PPTP Servers Overview
As an alternate to IPSec VPN and L2TP tunnels, you can configure a Point-to-Point Tunnel
Protocol (PPTP) server on the VPN firewall to allow users to access PPTP clients over PPTP
tunnels. A maximum of 25 simultaneous PPTP user sessions are supported. (The very first IP
address of the PPTP address pool is used for distribution to the VPN firewall.)
Set Up Virtual Private Networking With IPSec Connections
420