NETGEAR FVS336Gv3 Reference Manual page 256

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
8. Enter the settings as described in the following table.
Setting
Service
Action
Send to LAN Server
WAN Destination IP
Address
WAN Users
QoS Profile
Log
Bandwidth Profile
9. Click the Apply button.
Your settings are saved. The new rule is added to the Inbound Services table on the LAN
WAN Rules screen.
Description
From the menu, select HTTP.
From the menu, select ALLOW always.
From the menu, select Single address.
In the Start field, enter the LAN IP address of the server that must function as a
public web server.
The setting that determines the destination IP address applicable to incoming traffic.
This is the public IP address that maps to the internal public web server on the LAN.
From the menu, select the WAN interface that you want to use.
From the menu, select Any.
You can leave the selection from the menu at None.
You can leave the selection from the menu at Never.
You can leave the selection from the menu at NONE.
Customize Firewall Protection
256