View The Active L2Tp Users And Disconnect Active Users - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
Setting
Ending IP Address
Idle Timeout
Authentication
Select one or more of the following authentication methods to authenticate L2TP users:
• PAP. RADIUS-Password Authentication Protocol (PAP).
• CHAP. RADIUS-Challenge Handshake Authentication Protocol (CHAP).
• MSCHAP. RADIUS-Microsoft CHAP (MSCHAP).
• MSCHAPv2. RADIUS-Microsoft CHAP version 2 (MSCHAPv2).
8. Click the Apply button.
Your settings are saved.

View the Active L2TP Users and Disconnect Active Users

The following procedure describes how to view all active L2TP users and disconnect active
L2TP users.

To view all active L2PTP users and disconnect active L2TP users:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select VPN > Connection Status > L2TP Active Users.
The L2TP Active Users screen displays. The following figure does not show any active
users.
Description
The last IP address of the pool. A maximum of 26 contiguous addresses is
supported. (The first address of the pool cannot be assigned to a user.)
The period after which an idle user is automatically logged out of the L2TP server.
The default idle time-out period is 5 minutes.
Set Up Virtual Private Networking With IPSec Connections
426