Configure A Stateless Dhcpv6 Server Without Prefix Delegation For The Lan - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
For stateless DHCPv6 with prefix delegation, you must enable and configure the RADVD, but
you do not need to add advertisement prefixes to the RADVD because the DHCPv6 server
assigns the prefixes that you specify for the DHCPv6 server.

To set up a stateless DHCPv6 server with prefix delegation in the LAN, complete these
tasks:
1. Configure the stateless DHCP server with prefix delegation (see
DHCPv6 Server with Prefix Delegation for the LAN
2. Specify prefixes and a prefix lengths for the DHCPv6 server (see
Prefixes for Prefix Delegation
3. Enable and configure the RADVD (see
the LAN on page 172).
Concept: Stateful DHCPv6 Server for the LAN
The IPv6 clients in the LAN obtain an interface IP address, configuration information such as
DNS server information, and other parameters from the DHCPv6 server (see ).
The IP address is a dynamic address that the DHCPv6 server assigns from IPV6 address
pools that you must configure.
Enable RADVD for default route where configuring prefixes is optional.

To set up a stateful DHCPv6 server in the LAN, complete these tasks:
1. Configure the stateful DHCPv6 server (see
Address Pools for the LAN
2. Add one or more IPv6 address pools for the DHCPv6 server (see
Address Pool on page 169).
Configure a Stateless DHCPv6 Server Without Prefix
Delegation for the LAN
With a stateless DHCPv6 server in the LAN, the IPv6 clients in the LAN generate their own IP
address by using a combination of locally available information and router advertisements
from the Router Advertisement Daemon (RADVD), but receive DNS server information from
the DHCPv6 server.
If you configure a stateless DHCPv6 server in the LAN, you also must enable the RADVD
and configure advertisement prefixes (see
for the LAN on page 172).
For more information about a stateless DHCPv6 server for the LAN, see
DHCPv6 Server Without Prefix Delegation for the LAN

To configure a stateless DHCPv6 server without prefix delegation and IPv6 settings for
the LAN:
1. On your computer, launch an Internet browser.
on page 164).
Manage the IPv6 Router Advertisement Daemon for
Manage a Stateful DHCPv6 Server and IPv6
on page 166).
Manage the IPv6 Router Advertisement Daemon
Configure the IPv6 LAN Settings
156
Manage a Stateless
on page 159).
Manually Add IPv6 LAN
Add an IPv6 LAN
Concept: Stateless
on page 155.