NETGEAR FVS336Gv3 Reference Manual page 581

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
4. At Site 2, set up a VPN tunnel between Gateway 2 and Gateway 1 at Site 1 (see
the VPN Tunnel on Gateway 2 at Site 2
5. At Site 2, change the local IP address in the VPN policy on Gateway 2 to the WAN IP
address of Gateway 2 (see
2 at Site 2 on page 584).
6. At Site 2, specify that Gateway 2 must send the syslogs to the syslog server at Site 1 (see
On the Gateway at Site 2, Specify the Syslog Server on Site 1
The sections listed describe Steps 2 through 6, using the topology that is described in the
following table.
Type of Address
WAN IP address
LAN IP address
LAN subnet mask
LAN IP address syslog server
After you have completed the steps, the VPN tunnel is established automatically and the
syslogs are sent to the syslog server at Site 1. For information about verifying the VPN
connection, see View the VPN Connection Status, L2TP Users, and PPTP Users
page 596.
Configure the VPN Tunnel on Gateway 1 at Site 1
The following procedure describes how to set up a VPN tunnel at Site 1 between Gateway 1 at
Site 1 and Gateway 2 at Site 2.

To create a gateway-to-gateway VPN tunnel on Gateway 1 at Site 1 to Gateway 2 at
Site 2, using the IPSec VPN wizard:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter 10.0.0.1 if you log in from the WAN or enter
192.168.10.0 if you log in from the LAN.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
on page 583)
Change the Remote IP Address in the VPN Policy on Gateway
Gateway 1 at Site 1 Gateway 2 at Site 2
10.0.0.1 10.0.0.2
192.168.10.0 192.168.20.0
255.255.255.0 255.255.255.0
192.168.10.2 Not applicable
Monitor System Access and Performance
581
Configure
on page 585).
on