The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2.
Select Security > Firewall > LAN DMZ Rules.
The LAN DMZ Rules screen displays.
3.
Select the IPv6 radio button.
The screen displays the IPv6 settings.
4.
Click the Add table button under the Outbound Services table.
5.
Enter the settings as described in
In addition to selections from the Service, Action, and Log lists, you must make
selections from the following lists:
•
LAN Users
•
DMZ Users
Unless your selection from the Action list is BLOCK always, you also must make a
selection from the Select Schedule list.
6.
Click the Apply button.
Your changes are saved.
Create LAN DMZ Inbound Service Rules
The Inbound Services table lists all existing rules for inbound traffic. If you did not define any
rules, no rules are listed. By default, all inbound traffic (from the LAN to the DMZ) is blocked.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Table 29
on page 128.
Firewall Protection
158