NETGEAR FVS336Gv3 Reference Manual page 151

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
8. Enter the settings as described in the following table.
Setting Description
RIP
RIP Direction From the RIP Direction menu, select the direction in which the VPN firewall sends and
receives RIP packets:
•
•
•
•
RIP Version By default, the RIP version is set to Disabled. From the RIP Version menu, select the
version:
•
•
Authentication for RIP-2B/2M
Authentication for RP-2B or RIP-2M is disabled by default, that is, the No radio button is selected. To
enable authentication for RP-2B or RIP-2M, select the Yes radio button and enter the settings for the
following fields.
First Key Parameters
MD5 Key Id The identifier for the key that is used for authentication.
MD5 Auth Key The password that is used for MD5 authentication.
Not Valid Before The beginning of the lifetime of the MD5 key. Enter the month, date, year, hour, minute,
and second. Before this date and time, the MD5 key is not valid.
Not Valid After The end of the lifetime of the MD5 key. Enter the month, date, year, hour, minute, and
second. After this date and time, the MD5 key is no longer valid.
Second Key Parameters
MD5 Key Id The identifier for the key that is used for authentication.
MD5 Auth Key The password that is used for MD5 authentication.
Not Valid Before The beginning of the lifetime of the MD5 key. Enter the month, date, year, hour, minute,
and second. Before this date and time, the MD5 key is not valid.
Not Valid After The end of the lifetime of the MD5 key. Enter the month, date, year, hour, minute, and
second. After this date and time, the MD5 key is no longer valid.
9. Click the Apply button.
None. The VPN firewall neither advertises its route table nor accepts any RIP
packets from other routers. This effectively disables RIP and is the default setting.
In Only. The VPN firewall accepts RIP information from other routers but does not
advertise its routing table.
Out Only. The VPN firewall advertises its routing table but does not accept RIP
information from other routers.
Both. The VPN firewall advertises its routing table and also processes RIP
information received from other routers.
RIP-1. Classful routing that does not include subnet information. This is the most
commonly supported version.
RIP-2. Routing that supports subnet information. Both RIP-2B and RIP-2M send
the routing data in RIP-2 format:
- RIP-2B. Sends the routing data in RIP-2 format and uses subnet broadcasting.
- RIP-2M. Sends the routing data in RIP-2 format and uses multicasting.
Configure the IPv4 LAN Settings
151