Add Lan Dmz Rules; Add Lan Dmz Outbound Service Rules - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
The following table lists the menus that apply to an IPv6 DMZ WAN inbound rule.
Menus that apply to all IPv6 DMZ WAN inbound
rules
Service
Action
DMZ Users
WAN Users
Log
10. Click the Apply button.
Your settings are saved. The new rule is added to the Inbound Services table on the DMZ
WAN Rules screen.

Add LAN DMZ Rules

The following sections provide information about managing LAN DMZ rules:
•

Add LAN DMZ Outbound Service Rules

• Add LAN DMZ Inbound Service Rules
Add LAN DMZ Outbound Service Rules
For LAN DMZ traffic, the default outbound policy is to block all traffic to the DMZ.
You can change the default policy by adding LAN DMZ firewall rules that allow specific types
of traffic to go out from the LAN to the DMZ. Alternately, you can allow all outbound traffic and
then block only specific services from passing through the VPN firewall.
You can allow or block access based on the service or application, source or destination IP
addresses, and time of day.
The following sections provide information about adding LAN DMZ outbound service rules:
• Add an IPv4 LAN DMZ Outbound Rule
• Add an IPv6 LAN DMZ Outbound Rule
Add an IPv4 LAN DMZ Outbound Rule
The following procedure describes how to add an IPv4 LAN DMZ outbound rule.
Menus that apply only when your selection from
the Action menu is not BLOCK always
Select Schedule
Note:
from the Action menu includes by schedule.
Customize Firewall Protection
244
This menu is available only when the selection