NETGEAR FVS336Gv3 Reference Manual page 604

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
The Router Status screen displays.
6. Select Network Configuration > LAN Settings > LAN Groups.
The LAN Groups screen displays. The following figure shows some examples in the
Known PCs and Devices table.
The Known PCs and Devices table contains lists all known computers and network
devices that are assigned dynamic IP addresses by the VPN firewall, were discovered by
other means, or were manually added. Collectively, these entries make up the network
database.
The following table describes the information that displays for each device.
Item Description
Name The name of the computer or device. For computers that do not support the NetBIOS
protocol, the name is displayed as Unknown (you can change the entry manually to add
a meaningful name). If the computer or device was assigned an IP address by the
DHCP server, the name is appended by an asterisk.
IP Address The current IP address of the computer or device. For DHCP clients of the VPN firewall,
this IP address does not change. If a computer or device is assigned a static IP
address, you must update this entry manually after the IP address on the computer or
device changes.
MAC Address The MAC address of the computer's or device's network interface.
Group You can assign each computer or device to a single LAN group. By default, a computer
or device is assigned to Group 1. However, you can manually select a different LAN
group (see
Action The Edit button, which provides access to the Edit Groups and Hosts screen.
For information about how to change information for a device or manually add a device
to the table, see
Manage the Network Database
Manage the Network Database
Monitor System Access and Performance
604
on page 134).
on page 134.