View Ssl Vpn Connection And Status Information; View The Vpn Firewall Ssl Vpn Connection Status And Disconnect Active Users - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3

View SSL VPN Connection and Status Information

The following sections provide information about viewing the SSL VPN tunnel connections
and log:
•

View the VPN Firewall SSL VPN Connection Status and Disconnect Active Users

• View the VPN Firewall SSL VPN Log
View the VPN Firewall SSL VPN Connection Status and
Disconnect Active Users
The following procedure describes how to view the connection status of all users who are
logged in to an SSL portal on the VPN firewall and disconnect active users.

To view the status of all active SSL VPN users on the VPN firewall and disconnect
active users:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select VPN > Connection Status > SSL VPN Connection Status.
The SSL VPN Connection Status screen displays.
Set Up Virtual Private Networking with SSL Connections
447