NETGEAR FVS336Gv3 Reference Manual page 497

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
3. In the Username field, type your user name and in the Password / Passcode field, type
your password.
For the default administrative account, the default user name is admin and the default
password is password.
4. If you changed the default domain or were assigned a domain, from the Domain menu,
select the domain.
If you did not change the domain or were not assigned a domain, leave the menu
selection at geardomain.
5. Click the Login button.
The Router Status screen displays.
6. Select Users > Domains.
The Domains screen displays.
7. In the List of Domains table, click the Edit button for the domain that you want to change.
The Edit Domains screen displays.
8. Change the settings.
For more information about the settings, see
9. Click the Apply button.
Your settings are saved. The modified domain displays in the List of Domains table on
the Domains screen.
Remove One or More Authentication Domains
The following procedure describes how to remove one or more domains that you no longer
need. However, if a domain has users assigned to it, you first must assign the users to
another domain; otherwise, you cannot remove the domain (see
page 506).
Note: You cannot remove the default domain geardomain.

To remove one or more authentication domains:
1. On your computer, launch an Internet browser.
2. In the address field of your browser, enter the IP address that was assigned to the VPN
firewall during the installation process.
The VPN firewall factory default IP address is 192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
Manage Users, Authentication, and VPN Certificates
497
Add an Authentication Domain
Change a User Account
on page 493.
on