NETGEAR FVS336Gv3 Reference Manual page 402

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
13. Enter the settings as described in the following table.
Note: The IKE policy settings that are described in the following table are
specifically for a Mode Config configuration. For information about
general IKE policy settings, see
page 371.
Setting
Mode Config Record
Do you want to use
Mode Config Record?
Select Mode Config
Record
Set Up Virtual Private Networking With IPSec Connections
Manually Add an IKE Policy
Description
Select the Yes radio button.
Note: Because Mode Config functions only in Aggressive mode, selecting the Yes
radio button sets the tunnel exchange mode to Aggressive mode. Mode Config also
requires that both the local and remote endpoints are defined by their FQDNs.
From the menu, select the Mode Config record that you created in
example uses NA Sales.
402
on
Step 9. This