Vlan Dhcp - NETGEAR FVS336Gv3 Reference Manual

ProSAFE Dual WAN Gigabit WAN SSL VPN Firewall FVS336Gv3
• VLAN ID. The unique ID (or tag) assigned to the VLAN profile.
• Subnet IP. The subnet IP address for the VLAN profile.
• DHCP Status. The DHCP server status for the VLAN profile, which can be either
Enabled or Disabled.
• Action. The Edit button, which provides access to the Edit VLAN Profile screen.
7. In the Default VLAN section, assign a VLAN profile to a LAN port by selecting a VLAN
profile from a port menu.
The enabled VLAN profile displays in the menu.
8. To assign a VLAN profile to another LAN port, repeat
9. Click the Apply button.
Your settings are saved.
Note: After you assign an active VLAN profile to LAN ports, all outbound
traffic is allowed and all inbound traffic is discarded except responses
to requests from the LAN side. For information about how to change
these default traffic rules, see
Protection.

VLAN DHCP

For each VLAN, you must specify the Dynamic Host Configuration Protocol (DHCP) options
(see Manage VLAN Profiles
For information about configuring the DHCP options for the VPN firewall's default VLAN, or
VLAN 1, see Configure the IPv4 Internet Connection and WAN Settings
The following sections provide information about VLAN DHCP concepts:
• DHCP Servers
• DHCP Relay
• DNS Proxy
• LDAP Servers
DHCP Servers
The default VLAN (VLAN 1) has the DHCP server option enabled by default, allowing the
VPN firewall to assign IP, DNS server, WINS server, and default gateway addresses to all
computers connected to the VPN firewall's LAN. The assigned default gateway address is
the LAN address of the VPN firewall. IP addresses are assigned to the attached computers
from a pool of addresses that you must specify. Each pool address is tested before it is
assigned to avoid duplicate addresses on the LAN. When you create a VLAN, the DHCP
server option is disabled by default.
Chapter 6, Customize Firewall
on page 121).
Configure the IPv4 LAN Settings
119
Step 7.
on page 30.