Field Service Ver. 3.0 Aug. 2006
6.3.35
Scanner Motor (M201)
A. Removal Procedure
1. Remove the Upper Rear Cover and the IR Upper Rear Cover.
See P.82, P.79
[2]
[3]
4. Remove 16 screws [5], and remove the IR reinforcement frame [6].
[6]
[5]
[1]
4038F2C128DA
[4]
4038F2C129DA
[5]
2. Remove the Harness from two Wire
Saddles [1] and the Edge Cover [2].
3. Disconnect the Connector [3], and
remove the Harness from the Wire
Saddle [4].
[5]
6. Other
[5]
4038F2C130DA
127