Dhcp Client Ifconfig - THOMSON 516 Reference Manual

dhcp client ifconfig

Show/set the configuration of DHCP lease created for a specific interface.
SYNTAX:
dhcp client ifconfig
where:
intf The name of the dynamic interface to be configured.
clientid The client identity to be associated with the lease.
none
Use in case no clientid should be associated with this lease.
hostname The host name of the client to be associated with the lease.
""
Use in case no hostname should not be associated with this lease.
addr The preferred dynamic IP address.
leasetime A number between 0 and 1814400 (seconds).
Represents the preferred time the client wants to use an address.
The default is
Note
Specifying -1 makes the lease permanent.
addrtrans Automatically enable address translation for this dynamic interface (pat) or not
(none).
dns Request (and accept) Domain Name System (DNS) server IP addresses (on) or not
(off).
gateway Request (and accept) gateway IP addresses (on) or not (off).
metric A number between 0 and 100.
Represents the gateway route metric.
The default is 1.
dnsmetric A number between 0 and 100.
Represents the DNS route metric.
The default is 1.
E-DOC-CTC-20040907-0010 v1.0
intf = <string>
[clientid = <{client-id | none}>]
[hostname = <hostname | "">]
[addr = <ip-address>]
[leasetime = <number>]
[addrtrans = <{none | pat}>]
[dns = <{off | on}>]
[gateway = <{off | on}>]
[metric = <number{0-100}>]
[dnsmetric = <number{0-100}>]
7200 (2 hours).
DHCP Commands
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
81