switch mirror capture
Define the specified port to be the Mirror Capture Port.
Only one port can be the Mirror Capture Port at any one time.
SYNTAX:
switch mirror capture
where:
port
The port to be the Mirror Capture Port.
Note
If no port number is specified, then the port number of the Mirror Capture Port
is shown.
EXAMPLE:
=>switch mirror capture port=2
=>switch mirror capture
Mirror capture port = 2
RELATED COMMANDS:
switch mirror egress
switch mirror ingress
E-DOC-CTC-20040907-0010 v1.0
port = <number{1-4}>
Enable or disable the specified port to be the Mirror Egress Port.
Enable or disable the specified port to be the Mirror Ingress Port.
Switch Commands
REQUIRED
341