Bridge Ifdetach - THOMSON 516 Reference Manual

bridge ifdetach

Detach a bridge interface.
SYNTAX:
bridge ifdetach intf = <intfname>
where:
intf The name of the bridge interface to be detached.
EXAMPLE:
=>bridge iflist
OBC : Internal
Connection State: connected
Port: OBC
RX bytes: 85261
TX bytes: 78983
...
myBridgeIntf: dest : ATM1
Retry : 10
Connection State: connected
Port: wan0
RX bytes: 0
TX bytes: 0
=>bridge ifdetach intf=myBridgeIntf
=>bridge iflist
OBC : Internal
Connection State: connected
Port: OBC
RX bytes: 88882
TX bytes: 81743
...
myBridgeIntf: dest : ATM1
Retry : 10
Connection State: not-connected
Port: (Unassigned)
=>
RELATED COMMANDS:
bridge ifattach
E-DOC-CTC-20040907-0010 v1.0
PortNr: 0 PortState: forwarding
frames: 807
frames: 1203
QoS : default Encaps : llc/snap
PortNr: 6 PortState: forwarding
frames: 0
frames: 0
PortNr: 0 PortState: forwarding
frames: 837
frames: 1249
QoS : default Encaps : llc/snap
PortNr: (Unknown)
Attach a bridged Ethernet interface.
dropframes: 0
Fcs : off
dropframes: 0
dropframes: 0
Fcs : off
PortState: forwarding
Bridge Commands
REQUIRED
53