Pppoe Ifadd - THOMSON 516 Reference Manual

pppoe ifadd

Create a new PPPoE interface.
SYNTAX:
pppoe ifadd [intf = <string>]
[dest = <RELAY | phonebook entry>]
where:
intf The name for the new PPP over Ethernet (PPPoE) interface.
Note
If not specified, the destination parameter must be specified. In this case the
name of the destination will double as interface name.
dest The Ethernet port to be used for this PPPoE interface (e.g. an ETHoA name).
EXAMPLE:
=>pppoe iflist
myPPPoE: dest : myETHoA [local disconnect]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1492
auth = auto user = johndoe
admin state = up
LCP : state = reqsent
IPCP: state = initial
acname : --- service : ---
=>pppoe ifadd intf=yourPPPoE
=>pppoe iflist
myPPPoE: dest : myETHoA [local disconnect]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1492
auth = auto user = johndoe
admin state = up
LCP : state = reqsent
IPCP: state = initial
acname : --- service : ---
yourPPPoE: dest : [00:00:00]
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1492
auth = auto user =
admin state = down
LCP : state = initial
IPCP: state = initial
acname : --- service : ---
=>
RELATED COMMANDS:
pppoe ifdelete
pppoe iflist
E-DOC-CTC-20040907-0010 v1.0
[00:00:00]
password = ********
oper state = down link state = connected
retransm = 1 term. reason =
retransm = 0 term. reason =
[00:00:00]
password = ********
oper state = down link state = connected
retransm = 1 term. reason =
retransm = 0 term. reason =
password =
oper state = down link state = not-connected
retransm = 9 term. reason =
retransm = 0 term. reason =
Delete a PPPoE interface.
Show current configuration of all or a specified PPPoE interface(s).
PPPoE Commands
OPTIONAL
OPTIONAL
287