Nat List - THOMSON 516 Reference Manual

nat list

Lists NAT/PAT connection database.
SYNTAX:
nat list [addr = <ip-address>]
where:
addr An address-translation enabled IP address.
Note
If not specified, all IP addresses are shown.
EXAMPLE:
=>nat list
Indx Prot Inside-addr:Port Outside-addr:Port Foreign-addr:Port Flgs Expir State
1 6 10.0.0.138:80
2 17 10.0.0.138:138
3 17 10.0.0.138:137
4 17 10.0.0.138:7938
5 17 10.0.0.138:513
6 17 10.0.0.138:111
=>
RELATED COMMANDS:
nat create
nat delete
E-DOC-CTC-20040907-0010 v1.0
172.16.0.5:1080 0.0.0.0:0
10.0.0.140:138 10.0.0.20:138
10.0.0.140:137 10.0.0.254:137
10.0.0.140:7938 10.0.0.96:4756
10.0.0.140:513 10.0.0.109:513
10.0.0.140:111 10.0.0.96:4756
Create a static NAT/PAT entry.
Delete a static NAT/PAT entry.
Control
19 8 9
11 20 10
11 20 10
11 20 10
11 20 10
11 20 10
NAT Commands
OPTIONAL
259