switch mirror ingress
Enable or disable the specified port to be the Mirror Ingress Port.
Only one port can be the Mirror Ingress Port at any one time.
But a port can be the Mirror Egress Port and the Mirror Ingress Port at the same time.
SYNTAX:
switch mirror ingress
where:
port
The port to be the Mirror Ingress Port.
Note
If no port number is specified, then the port number of the current Mirror
Ingress Port is shown.
state
This parameter permits to enable/disable a port as Mirror Ingress Port.
EXAMPLE:
Here port 2 is enabled as Mirror Ingress Port
=>switch mirror ingress port=2
=>switch mirror ingress
Ingress mirror port = 2
Here port 2 is disabled as Mirror Ingress Port
=>switch mirror ingress
Ingress mirror port = 2
=>switch mirror ingress port=2 state=disabled
=>switch mirror ingress
=>
RELATED COMMANDS:
switch mirror capture
switch mirror egress
E-DOC-CTC-20040907-0010 v1.0
port = <number{1-4}>
[state = <{enabled | disabled}>]
Define the specified port to be the Mirror Capture Port.
Enable or disable the specified port to be the Mirror Egress Port.
Switch Commands
REQUIRED
OPTIONAL
343