Dhcp Client Ifconfig - THOMSON SpeedTouch 585 Reference Manual

DHCP Commands

dhcp client ifconfig

Configure a DHCP lease created for a specific interface.
Use the command :dhcp client ifrelease before configuring the dhcp client.
SYNTAX:
dhcp client ifconfig
where:
intf The name of the dynamic interface to be configured.
clientid The client identity to be associated with the lease.
Note
hostname The host name of the client to be associated with the lease.
Note
userid The user class identifier option to be associated with the lease.
addr The preferred dynamic IP address.
leasetime A number (of seconds).
Represents the time in seconds the client wants to use an address.
The default is
Note
dns Accept DNS server IP addresses (enabled) or not (disabled).
The default is enabled.
statrt Accept static routes (enabled) or not (disabled).
The default is enabled.
gateway Accept gateway IP addresses (enabled) or not (disabled).
The default is disabled.
vendorid Enable transmission of the vendor class identifier option (enabled) or not (disabled).
The default is disabled.
metric A number between 0 and 100.
Represents the route metric for default gateway and static routes.
The default is 1.
dnsmetric A number between 0 and 100.
Represents the DNS route metric.
The default is 1.
104
intf = <string>
[clientid = <clientid | none>]
[hostname = <hostname | "">]
[userid = <quoted string>]
[addr = <ip-address>]
[leasetime = <number>]
[dns = <{disabled | enabled}>]
[statrt = <{disabled | enabled}>]
[gateway = <{disabled | enabled}>]
[vendorid = <{disabled | enabled}>]
[metric = <number{0-100}>]
[dnsmetric = <number{0-100}>]
Use none in case no clientid should be associated with this lease.
""
Use in case no hostname should not be associated with this lease.
7200 (2 hours).
Specifying 0 makes the lease permanent.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20050531-0058 v1.0