Config Flush - THOMSON 516 Reference Manual

config flush

Flush the complete current configuration.
This command does not affect saved configurations.
SYNTAX:
config flush [flush_ip = <{no | yes}>]
where:
flush_ip Flush IP settings (yes) or not (no).
The default is no.
Note
Not keeping the IP settings could cause lost IP connectivity in the LAN.
EXAMPLE:
=>ip rtlist
Destination Source
10.0.0.0/24 10.0.0.0/24
172.16.0.5/32 0.0.0.0/0
10.0.0.140/32 0.0.0.0/0
127.0.0.1/32 0.0.0.0/0
10.0.0.0/24 0.0.0.0/0
172.16.0.0/24 0.0.0.0/0
=>config flush flush_ip=no
=>ip rtlist
Destination Source
10.0.0.0/24 10.0.0.0/24
10.0.0.140/32 0.0.0.0/0
127.0.0.1/32 0.0.0.0/0
10.0.0.0/24 0.0.0.0/0
=>config flush flush_ip=yes
######### ALL TCP/IP CONNECTIVITY IS LOST ##########
RELATED COMMANDS:
config erase
config load
config save
E-DOC-CTC-20040907-0010 v1.0
Gateway
10.0.0.140
172.16.0.5
10.0.0.140
127.0.0.1
10.0.0.140
172.16.0.5
Gateway
10.0.0.140
10.0.0.140
127.0.0.1
10.0.0.140
Erase a user configuration file.
Load complete saved (backup) or default configuration file.
Save the current configuration
Intf Mtrc
eth0 0
cip1 0
eth0 0
loop 0
eth0 0
cip1 1
Intf Mtrc
eth0 0
eth0 0
loop 0
eth0 0
Config Commands
OPTIONAL
71