Pppoa Iflist - THOMSON 516 Reference Manual

pppoa iflist

Show current configuration of a specific or all PPPoA interface(s).
SYNTAX:
pppoa iflist [intf = <string>]
where:
intf The name of the PPPoA interface for which the configuration must be shown.
Note
If not specified, all PPPoA interfaces are shown.
EXAMPLE:
=>pppoa iflist
pppoa: dest : pppoa
Retry : 10 QoS default
mode = IP routing
flags = echo magic accomp restart mru addr route savepwd
dns metric = 0 trans addr = pat
route : dst=0.0.0.0/0 - src=10.0.0.0/1 (metric 1)
auth = auto user = johndoe@ISP
admin state = up
LCP : state = starting
IPCP: state = initial
pppoa2: dest : pppoa2
Retry : 10 QoS default
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0 mru = 1500
auth = auto user =
admin state = down
LCP : state = initial
IPCP: state = initial
=>
RELATED COMMANDS:
pppoa ifadd
pppoa ifdelete
pppoa iflist
E-DOC-CTC-20040907-0010 v1.0
[00:00:00]
encaps VC-MUX
mru = 1500
password = ********
oper state = up link state = connected
retransm = 1 term. reason =
retransm = 0 term. reason =
[00:00:00]
encaps VC-MUX
password =
oper state = down
retransm = 10 term. reason =
retransm = 0 term. reason =
Create a new PPPoA interface.
Delete a PPPoA interface.
Show current configuration of a specific or all PPPoA interface(s).
link state = not-connected
PPPoA Commands
OPTIONAL
281