Ip Rtadd - THOMSON 516 Reference Manual

IP Commands

ip rtadd

Add a route to the SpeedTouch
SYNTAX:
ip rtadd dst = <ip-address>
[dstmsk = <ip-mask(dotted or cidr)>]
[label = <string>]
[gateway = <ip-address>]
[intf = <string>]
[metric = <number{0-100}>]
where:
dst The destination IP address(es) for this route.
Supports cidr notation.
dstmsk The destination IP address mask.
label The name of the label.
gateway The IP address of the next hop. Must be directly connected.
Note
intf Only for special interface routes: the outgoing IP interface name.
Note
metric The metric for this route (weight factor).
EXAMPLE:
=>ip rtlist
Destination Label
10.0.0.0/24
10.0.0.140/32
127.0.0.1/32
=>ip rtadd dst=10.10.0.0/24 src=10.0.0.0/24 gateway=10.0.0.140
=>ip rtlist
Destination Label
10.0.0.0/24
10.10.0.0/24
10.0.0.140/32
127.0.0.1/32
=>
RELATED COMMANDS:
ip rtdelete
ip rtlist
192
TM
routing table.
gateway
The parameters and
The parameters gateway and
Gateway
10.0.0.140
10.0.0.140
127.0.0.1
Gateway
10.0.0.140
10.0.0.140
10.0.0.140
127.0.0.1
Delete a route from the routing table.
Show the current routing table.
intf
are mutually exclusive.
intf are mutually exclusive.
Intf Mtrc Status
eth0 0 [UP]
eth0 0 [UP]
loop 0 [UP]
Intf Mtrc Status
eth0 0 [UP]
eth0 0 [UP]
eth0 0 [UP]
loop 0 [UP]
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040907-0010 v1.0