Ipqos Queue Config - THOMSON 516 Reference Manual

IPQoS Commands

ipqos queue config

Configure IP QoS subqueues.
SYNTAX:
ipqos queue config
where:
dest The destination interface for the IP QoS queues instantiation.
Typically, a phonebook entry.
queue A number between 0 and 3.
Represents the number of the queue, where:
propagate Higher priority packets will be queued in a lower priority queue, instead of being
dropped, as soon as the destination queue is in overflow state.
The packet will be put in a lower priority queue only once.
Choose between disabled or enabled.
The default is disabled.
Note
maxpackets A number between 0 and 250.
Represents the maximum number of packets in this queue.
The default is
Note
maxbytes A number between 0 and 64.
Represents the maximum size in kilobytes of this queue.
The default is
Note
respackets A number between 0 and 250.
Represents the reserved number of packets in this queue.
The default is
resbytes A number between 0 and 64.
Represents the reserved size in kilobytes of this queue.
The default is
218
dest = <string>
queue = <number{0-3}>
[propagate = <{disabled | enabled}>]
[maxpackets = <number{0-250}>]
[maxbytes = <number{0-64}>]
[respackets = <number{0-250}>]
[resbytes = <number{0-64}>]
3 is the Real Time queue
2 is the High queue
1 is the Medium queue
0 is the Best Effort queue.
The propagate flag for the lowest priority subqueue (the Best Effort
queue) has no meaning.
0 for the Real Time queue and
0 means that no upper limit is enforced for the number of packets in the
Real Time queue.
0 for the Real Time queue and
0 means that no upper limit is enforced for the number of kilobytes in
the Real Time queue.
30 for the Real Time queue and
12 for the Real Time queue and
100 for all other queues.
20 for all other queues.
13 for all other queues.
4 for all other queues.
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
E-DOC-CTC-20040907-0010 v1.0