Pppoe Ifscan - THOMSON 516 Reference Manual

PPPoE Commands

pppoe ifscan

Scan a PPPoE interface for available Access Concentrator names and Service Names.
Use the command :pppoe ifdetach for this interface before performing a scan on it.
SYNTAX:
pppoe ifscan
where:
intf The name of the Routed PPPoE interface to be scanned.
time A number between 0 and 36000 (seconds).
Represents the time to scan for services.
EXAMPLE:
=>pppoe iflist
myPPPoE: dest : myETHoA
Retry : 10
mode = IP routing
flags = echo magic accomp restart mru addr savepwd
dns metric = 0
auth = auto
admin state = up
LCP : state = reqsent
IPCP: state = initial
acname : ---
=>pppoe ifscan intf=myPPPoE time=45
Service Name
Done !
=>
296
intf = <string>
[time = <number{0-36000}>]
[00:00:00]
mru = 1492
user = johndoe password = ********
oper state = down
retransm = 6
retransm = 0
service : ---
link state = connected
term. reason =
term. reason =
Access Concentrator
REQUIRED
OPTIONAL
E-DOC-CTC-20040907-0010 v1.0