Eth Config - THOMSON 516 Reference Manual
Multi-user adsl gateways
Hide thumbs
Also See for 516:
- Reference manual (710 pages) ,
- User manual (116 pages) ,
- Setup and user manual (84 pages)
Table of Contents
Advertisement
Eth Commands
eth config
Enable/disable the Ethernet interface.
SYNTAX:
eth config
where:
intf
The number of the Ethernet interface to be configured.
state
Enable or disable the Ethernet interface.
The default is enabled.
EXAMPLE:
The example below is for a SpeedTouch
=>eth config
ETH Intf 1
port state = UP [forwarding]
=>eth config intf=1 state=disabled
=>eth config
ETH Intf 1
port state = DOWN [disabled]
=>
The example below is for a SpeedTouch
=>eth config
ETH Intf 1
port state = UP [forwarding]
ETH Intf 2
port state = UP [forwarding]
ETH Intf 3
port state = UP [forwarding]
ETH Intf 4
port state = UP [forwarding]
=>eth config intf 4 state=disabled
=>eth config
ETH Intf 1
port state = UP [forwarding]
ETH Intf 2
port state = UP [forwarding]
ETH Intf 3
port state = UP [forwarding]
ETH Intf 4
port state = DOWN [disabled]
=>
RELATED COMMANDS:
eth iflist
142
intf = <number>
[state = <{enabled | disabled}>]
TM
516:
TM
546:
Show the Ethernet port configuration and current operating status.
REQUIRED
OPTIONAL
E-DOC-CTC-20040907-0010 v1.0
Advertisement
Table of Contents
