Bridge Commands
bridge config
Show/set the bridge configuration setings.
SYNTAX:
bridge config
where:
age
A number between 10 and 100000 (seconds).
Represents the lifetime of a dynamically learned Medium Access Control (MAC) address.
The default is 300.
filter
The bridge filter to be applied for all Wide Area Network (WAN) bridge ports.
Choose between:
no_WAN_broadcast:
broadcasts from the SpeedTouch
from the Local Area Network (LAN) to the WAN are still passed through.
PPPoE_only:
only PPPoE broadcasts are passed through, all others are filtered out
none:
no broadcasts are filtered out.
The default is no_WAN_broadcast.
EXAMPLE:
=>bridge config
Ageing : 300
Filter : no_WAN_broadcast
=>bridge config age=600
=>bridge config
Ageing : 600
Filter : no_WAN_broadcast
=>
46
[age = <number {10 - 100000}>]
[filter = <{no_WAN_broadcast | PPPoE_only | none}>]
TM
itself to the WAN are filtered out, broadcasts
OPTIONAL
OPTIONAL
E-DOC-CTC-20040907-0010 v1.0