Bridge Iflist - THOMSON 516 Reference Manual

Bridge Commands

bridge iflist

Show the current state of all or the selected bridge interfaces.
SYNTAX:
bridge iflist
where:
intf The name of the bridge interface for which the configuration must be shown.
Note
EXAMPLE:
=>bridge iflist
OBC : Internal
Connection State: connected
Port: OBC
RX bytes: 99930
TX bytes: 93572
...
ethport5 : Internal
Connection State: connected
Port: ethport5
RX bytes: 2150291312 frames: 2150259736
TX bytes: 2150201352 frames: 2147888072
myBridgeIntf: dest : ATM1
Retry : 10
Connection State: connected
Port: wan0
RX bytes: 0
TX bytes: 0
=>
DESCRIPTION:
RX bytes
TX bytes
OBC
RELATED COMMANDS:
bridge ifadd
bridge ifdelete
54
[intf = <intfname>]
If no interface is specified, all bridge interfaces are shown.
PortNr: 0 PortState: forwarding
frames: 969
frames: 1443
PortNr: 5
QoS : default
PortNr: 6 PortState: forwarding
frames: 0
frames: 0
The number of Received bytes.
The number of Transmitted bytes.
On Board Controller: indicates the physical bridge port.
Create a bridged Ethernet interface.
Delete a bridge interface.
dropframes: 0
PortState: forwarding
dropframes: 3
Encaps : llc/snap Fcs : off
dropframes: 0
OPTIONAL
E-DOC-CTC-20040907-0010 v1.0