About This Document - THOMSON 516 Reference Manual

About this Document

Introduction
Welcome to the SpeedTouch
For the Service Provider, this Reference Guide aims to be a concise and practical document for creating a
customized Service Template file, based on the SpeedTouch
TM
configure the SpeedTouch
For the fastidious user, this Reference Guide aims to be a handbook for advanced and detailed configuration and
troubleshooting of the SpeedTouch
Applicability
This CLI Reference Guide covers the CLI commands of the following Digital Subscriber Line (DSL) SpeedTouch
products:
TM
SpeedTouch 516(i) Multi-User ADSL Gateway (R5.2.7)
TM
SpeedTouch 536(i) Multi-User ADSL Gateway (R5.2.7)
TM
SpeedTouch 546(i) Multi-User ADSL Gateway (R5.2.7)
TM
SpeedTouch 510v5(i) Multi-User ADSL Gateway (R5.2.7)
TM
SpeedTouch 530v5(i) Multi-User ADSL Gateway (R5.2.7)
For readability, all are referred to as SpeedTouch
concerned.
Contents
The Reference Guide consists of two main parts:
CLI Navigation:
This chapter familiarizes the user with the SpeedTouch
through the CLI and to perform some operations on the CLI.
CLI Command Description:
The other chapters describe all the available CLI commands of the SpeedTouch
alphabetical order.
Each command is described in a systematic manner:
The full name of the CLI command (including the group selection).
A short description of the CLI command, if necessary completed by a description of the possible impact
on the user and/or the SpeedTouch
The syntax of the command with a description of each parameter.
An example to demonstrate the use of the CLI command.
A list of related CLI commands.
E-DOC-CTC-20040907-0010 v1.0
TM
Command Line Interface (CLI) Reference Guide!
and PC(s).
TM
via its character based CLI command set.
TM
.
TM
CLI command set, to be used by the end-user to
TM
throughout this document unless a specific variant is
TM
CLI. It describes general manipulations to navigate
TM
per command group and in
15
TM