Ethoa Ifconfig - THOMSON 516 Reference Manual

ethoa ifconfig

Configure an ETHoA interface.
SYNTAX:
ethoa ifconfig intf = <string>
[dest = <string>]
[qos = <string>]
[encaps = <{llc/snap | vcmux}>]
[retry = <number {0-65535}>]
where:
intf The name of the ETHoA interface to be configured.
dest The destination for this interface. Typically a phonebook entry.
Note
This parameter needs only to be specified in case of an interface created
without specified destination.
qos The name of a qosbook entry defining the QoS parameters for the WAN link.
encaps The type of encapsulation to be used for this ETHoA interface.
Choose between:
llc/snap
vcmux.
retry A number between 0 and 65535.
Represents the number of WAN connection setup retries before giving up.
The default is 10.
EXAMPLE:
=>ethoa iflist
Moreethoa : dest : Br4
Retry : 10
Connection State : connected
RX bytes: 0
TX bytes: 0
=>ethoa ifconfig intf=Moreethoa encaps=llc/snap retry=15
=>ethoa iflist
Moreethoa : dest : Br4
Retry : 15
Connection State : connected
RX bytes: 0
TX bytes: 0
=>
E-DOC-CTC-20040907-0010 v1.0
QoS : default Encaps : vcmux
frames: 0
frames: 0 dropframes: 0
QoS : default Encaps : llc/snap
frames: 0
frames: 0 dropframes: 0
ETHoA Commands
Fcs : off
Fcs : off
REQUIRED
OPTIONAL
OPTIONAL
OPTIONAL
OPTIONAL
149